Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Operating instructions
ITLR-2300(T)
The remote adapters ITLR-2300 and ITLR-2300T are suitable for
wireless switching of lamps and electrical devices up to a switching
power of 2300 W.
The ITLR-2300T offers numerous capabilities with automatic switch-off of
7 sec up to 8 hr. Fig. 1
e.g: waste disposal unit, heat pump, lighting in entrance area, children's
bedroom, etc.
All intertechno transmitters are suitable for switching operations.
Please also observe the operating instructions for your transmitter.
The remote adapters ITLR-2300 and ITLR-2300T can also be switched on
and off at the learn button, without a remote control being necessary.
Encoding
Have your chosen transmitter ready.
Insert the remote adapter into the socket.
1.) Press the the Learn button (L) on the receiver (approx. 2 sec.) Fig. 2
until the red LED flashes slowly.
2.) Press the required button on the transmitter ("ON").
The remote receiver switches on twice to indicate that the new code has
been accepted.
DONE!
A maximum of 16 codes (transmitters) can be configured in total. This
also makes planned group activation very easy.
Several remote receivers can be switched on and off individually or
together.
Codes remain stored even after the device has been unplugged or if
there is a power failure.
›
Werbung
