Bosch DHI665VGB Gebrauchs- Und Montageanleitung Seite 25

Filters and maintenance
Activated carbon filter:
For neutralizing odours in recirculating
mode.
Caution:
As the filter becomes more and more
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.
Important:
Change the activated carbon filter promptly
to prevent the risk of fire from the
accumulation of heat when deep-fat frying
or roasting.
Inserting the filter:
Warning: The halogen bulbs must be
switched off and cool.
1. Remove the metal filters
(see "Removing and inserting the metal
grease filters").
2. Insert the activated carbon filter.
3. Engage the catches at both sides.
4. Insert the metal-mesh grease filters (see
"Removing and inserting the metal-mesh
grease filters").
5. Cancel the ã display.
Press the L button for at least
3 seconds.
ã
The display then goes out.
All manuals and user guides at all-guides.com
Saturation indicator:
When the activated carbon filter is satura-
ted, an acoustic signal is emitted for 6
seconds when the fan has switched off and
ã
should then be replaced immediately.
Removing the filter:
Warning: The halogen bulbs must be
switched off and cool.
1. Remove the metal-mesh filters.
2. Depress the catches on both sides of
3. Replacing the activated carbon filter:
4. Insert the grease filters.
Disposing of the old activated carbon
filter:
is displayed. The activated carbon filter
the filter and remove the activated
carbon filter.
A replacement filter can be obtained
from any authorized dealer
(see optional accessories).
Use original filters only.
This will ensure maximum
performance.
Activated carbon filters do not contain
any pollutants and can be disposed of
with domestic refuse.
25