Inhaltsverzeichnis
Werbung
• Anti-crease+
If you press and hold the spin selection button for 3 seconds, this function will be selected and the programme
follow-up light of the relevant programme will turn on. When this function is selected, the drum will rotate for
up to eight hours to ensure that the clothes do not crease at the end of the programme. At any time during
these eight hours, you can cancel the programme and unload the machine. Press the function selection key or
the machine on/off key to cancel the function. The programme follow-up light will remain on until the function
is cancelled or the step is complete. If the function is not cancelled, it will also be enabled in the next washing
cycles.
• Softener Selection
Press and hold the Auxiliary Function (Automatic Dosing) button 2 for 3 seconds to select this function. If you
select this function while the softener symbol is active on the display, softener will become off. If you select
this function while the softener symbol is inactive on the display, softener will become on.
• Child lock
You can use the Child Lock to prevent children from tampering with the machine. Thus you can avoid any
changes in a running programme.
C
When the Child Lock is enabled, you can press the On/Off button to switch the machine on or off. Programme resumes
when you start the machine again.
You will hear a warning if the buttons are pressed while Child Lock is enabled. This audible warning will be canceled if the
buttons are pressed five times consecutively.
To enable Child Lock:
Press and hold the auxiliary function button 3 for 3 seconds. Once the countdown "3-2-1" is
completed on the display, the child lock symbol will turn on. When this warning is displayed, you can release
the Auxiliary Function button 3.
To disable Child Lock:
Press and hold the auxiliary function button 3 for 3 seconds. Once the countdown "3-2-1" is
completed on the display, the child lock symbol will turn off.
• Bluetooth
You can use the Bluetooth connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To enable Bluetooth:
Press and hold the Remote Control function button for 3 seconds. You will see the countdown "3-2-1"
and the Bluetooth symbol will turn on. Release the Remote Control function button. The Bluetooth icon will
flash while the product is being paired with the smart device. If the connection is successful, the light of the
icon will remain on.
To disable Bluetooth:
Press and hold the Remote Control function button for 3 seconds. You will see the countdown "3-2-1"
and the Bluetooth symbol will turn off.
C
You must complete the first setup of the HomeWhiz app for Bluetooth to be enabled. After the setup, if you press the Remote
Control function button while the button is in the Programme Download/Remote Control position, the Bluetooth connection
will be enabled automatically.
4.3.9 End Time
Time display
While the programme is running, the time remaining to the end of the programme will be displayed in hours
and minutes, e.g. "01:30".
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes in the mains voltage.
With the End Time function, start of the programme can be delayed up to 24 hours. After pressing End Time
button, the programme's estimated end time will be displayed. If the End Time is set, End Time indicator will
turn on.
22 / EN
Washing Machine / User's Manual
Werbung
Inhaltsverzeichnis
