Dust Collection/Blowing Function Lever; Parallel Guide; Battery Disposal; Maintenance, Cleaning And Storing - Westfalia ASS18 Originalanleitung

The jig saw can be connected with a dust extractor
or a vacuum cleaner via the included adaptor pipe.
Insert the adapter into the saw.
Always use a dust removal, if possible, or at least
a dust mask for your own safety.

Dust Collection/Blowing Function Lever

To keep the cutting line clear of chips, place the suction/blowing function
lever (4) in the direction of "blowing". The airflow keeps the cutting line
clean.

Parallel Guide

Use the parallel guide (15) delivered for a cutting guide parallel to a wood
edge.
1. To install the parallel bar, slide it through the mounting latches (10)
in the base plate. With the centimetre scale on the guide bar you can
precisely set the distance between the edge and the saw blade.
2. With the screws in the base plate the guide bar can now be secured.

Battery Disposal

1. Run motor until the battery is completely discharged.
2. Remove the battery from the tool.
3. Wrap heavy insulating tape around the battery terminals or enclose in
a sealable plastic bag to prevent possible shorting.
4. Dispose of the battery through your local waste removal authority.
Physically damaged batteries may not be shipped.

Maintenance, Cleaning and Storing

 Remove the battery before undertaking any cleaning or maintenance
work.
 Do not use aggressive chemicals which may dissolve plastic parts, or
abrasives.
 The battery can be recharged up to 500 times if treated carefully.
However, over time the battery's performance can deteriorate. If
necessary you can purchase a 4.0 Ah replacement battery under the
Operation
24