Siemens SIMATIC ET200SP HA Produktinformation Seite 5

SIMATIC distributed I/O system
ET200SP HA
Product Information F-IO of ET200SP HA (multilanguage)
Compact Operating Instructions
1 Product Information F-IO of ET200SP HA
Function
The product or automation system in which the product is used controls or monitors safety-relevant or non-safety-relevant
applications in the area of machine and operator protection, in process technology and in other industrial fields.
Safety regulations
The product may only be handled by personnel qualified for the respective task and in compliance with the relevant
documentation for the respective task, in particular the safety instructions and warnings contained therein. Based on their
training and experience, qualified personnel are capable of recognizing risks and avoiding possible hazards when handling
these products.
WARNING
Intended use
Siemens products may only be used for the applications specified in the catalog and the associated technical
documentation. If third-party products and components are used, they must be recommended or approved by Siemens.
Correct and safe operation of the products requires proper transport, storage, setup, assembly, installation, commissioning,
operation and maintenance. The permissible ambient conditions must be observed.
Failure to do so may result in death or serious injury.
The notes provided in the associated documentation must be observed.
Product documentation
You can download the current documentation from the Internet in PDF format at the following link:
https://support.industry.siemens.com
To view and print the documentation, you need Acrobat PDF Reader version 5.0 or higher.
Ensure that the product documentation is available for all activities with the product.
Disclaimer
Technical modification of the product by the customer voids the warranty and invalidates the approval.
Safety assessment
For safety-related functions, perform a safety assessment of the entire system including all safety-related components.
Mounting and wiring
• Use SIMATIC products exclusively in the industrial field.
• Ensure an EMC-compliant design of your automation system.
WARNING
Danger of electric current!
Carry out the assembly of the product in a de-energized state. Install the product only in suitable enclosures, cabinets or
electrical operating rooms.
© Siemens AG 2023. All rights reserved
A5E52536179-AA , 01/2023
5