11.Technical data
Battery type
Current
consumption
Alarm volume
Detection method
Mute
Sound pattern of
the alarm
Temperature range
12. LED and acoustic signalling
LED flashes every
40 seconds
LED flashes every
second and
alarm sounds
LED flashes every
8 seconds
LED flashes every
40 seconds and a
short alarm tone
sounds
12
3V (CR123A) lithium
battery
(permanently
installed)
<8uA (standby),
<70mA (alarm)
85dB(A) within 3
metres
Optical
Approx. 10 minutes
BI 0.5s - pause 0.5s
- BI 0.5s - pause
0.5s - BI 0.5s -
pause 1.5s, with red
LED flash, repetition
of alarm scheme
5°C - 40°C
The smoke detector is
working properly
The TEST button was
pressed or the alarm
has been triggered
by smoke
The alarm is in mute
mode (see Section
6.4 Mute mode
(in case of a false
alarm))
Battery is weak. The
smoke detector must
be replaced.