Husqvarna K 770 VAC Bedienungsanweisung Seite 40

Throttle trigger lockout
The throttle trigger lockout prevents accidental operation
of the throttle trigger. If you put your hand around
the handle and push the throttle trigger lockout (A),
it releases the throttle trigger (B). If you release the
handle, the throttle trigger and the throttle trigger lockout
move back to their initial positions. This function locks
the throttle trigger at idle speed.
B
To examine the throttle trigger lockout
1. Make sure that the throttle trigger is locked at the
idle position when the throttle lockout is released.
40
A
2. Push the throttle lockout and make sure it goes back
when you release it.
3. Make sure that the throttle trigger and throttle
lockout move freely and that the return springs work
correctly.
4. Start the product and apply full throttle.
705 - 003 - 22.04.2022