Symbols On The Product - Husqvarna K 770 VAC Bedienungsanweisung

9. Throttle trigger lockout
10. Rear handle
11. Throttle trigger
12. Stop switch
13. Disconnection function for OilGuard
14. Starter handle
15. Starter housing
16. Muffler
17. Cutting equipment decal
18. Blade guard extender
19. Dust shield
20. Cutting direction
21. Flange, spindle, bushing
22. Dust extractor (Not supplied)
23. Operator's manual
24. Combination spanner
25. Dust extractor attachment
26. Hose
27. Rear belt guard
28. Belt tensioner
29. Type plate
30. Front belt guard
31. Lock screws for belt adjustment
32. Decompression valve
33. Air purge bulb
34. Fuel cap

Symbols on the product

WARNING! The product can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Always use approved personal protective
equipment. Refer to
equipment on page 39 .
This product is in accordance with
applicable EU directives.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
36
Personal protective
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
Kickback on page
the product. Refer to
42 .
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, clothes, dry
grass, etc.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw
blades.
WARNING! Do not use bonded abrasive
blades.
WARNING! For dry cutting only.
Use diamond blades only.
Choke
Air purge bulb
Decompression valve
Starter rope handle
705 - 003 - 22.04.2022