Setup With Motor Plugged In; Required Components - Siemens ECOFAST Handbuch

3.2

Setup with motor plugged in

3.2.1

Required components

The table below shows which components are required:
Item Order data
1 Motor starter
2 Mounting plate with screws for motor starter
3 Power T clamping connector, optional
5 x 4 mm2
5 x 6 mm2
4 Power cable
5 AS-i cable, trapezoidal-section yellow,
rubber 2 x 1.5 mm
6 AS-i cable, trapezoidal-section black,
rubber 2 x 1.5 mm
AUX PWR
7 Cable end covers for sealing open
cable ends (1 set = 10 covers)
Table 3-3: Components required for setting up with the motor plugged in
ECOFAST Motor Starters
GWA 4NEB 950 5221-12 DS 02
2
for fieldbus
2
for ext. 24 V auxiliary voltage
Installation of Motor Starters
Order number
3RK13..
depending on version
3RK1911-3AA00
3RK1911-2BF01
3RK1911-2BF02
3RK1911-0A.. depending
on the length and cross-
section
3RX901.-0AA00
depending on length
3RX902.-0AA00
depending on length
3RK1901-1MN00
3-3