Warning Caution; Symbols; Designations - Bosch Rexroth LU 2/P Montageanleitung

Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE:
1.3.2

Symbols

The following symbols indicate important information that is not safety-relevant but
increases the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated as designed.

Single, independent action
1. Numbered steps:
2. The numbers indicate that the action steps are sequential.
3.
1.3.3

Designations

This document uses the following designations:
Table 4: Designations
Designation Meaning
AS 2/... Adapter set for the automatic lubrication unit LU 2/P
LU 2/M-... Hydraulic block for the automatic lubrication unit LU 2/P
LU 2/P Automatic lubrication unit from the Rexroth transfer system TS 2plus
LU 2V-... Dosing valve set for the automatic lubrication unit LU 2/P
SE 2/... Conveyor unit from the Rexroth TS 2plus transfer system
About this documentation
Meaning
Indicates a hazardous situation that will result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in minor to
moderate injury if not avoided.
Property damage: the product or the surrounding area could
get damaged.
3 842 557 976/2020-08, MIT: LU 2/P-24V-3L, Bosch Rexroth AG
7/42