Personal Protective Equipment; Electrical Safety; Work Area Safety - Husqvarna BMG 555 Bedienungsanweisung

Personal protective equipment

WARNING:
instructions that follow before you use the
product.
• Always use correct personal protective equipment
when you operate the product. The personal
protective equipment does not erase the risk of
injury. The personal protective equipment decreases
the grade of injury if an accident occurs. Let your
dealer help you select the right equipment.
• Use approved eye protection while you operate the
product.
• Do not use loose, heavy and not applicable clothing.
Use clothes that let you move freely.
• Use approved protective gloves that enables a solid
hold.
• Use rubber protective gloves that prevents skin
irritation from wet concrete.
• Use an approved protective helmet.
• Always use approved hearing protection while you
operate the product. Noise for a long period can
cause noise-induced hearing loss.
• The product makes dust and fumes that contain
dangerous chemicals. Use an approved breathing
protection.
• Use boots with steel toe-caps and non-slip soles.
• Make sure that you have a first aid kit near.
• Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
Noise safety
WARNING:
instructions that follow before you use the
product.
• High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
• To keep the noise level to a minimum, do
maintenance on and operate the product as given
in the operator's manual.
• Use approved hearing protection while you operate
the product.
• Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.

Work area safety

WARNING:
instructions that follow before you use the
product.
1806 - 002 - 14.04.2022
Read the warning
Read the warning
Read the warning
• Do not use the product in fog, rain, strong winds,
cold weather, risk of lightning or other bad weather
conditions.
• Do not use the product in areas where fire or
explosions can occur.
• Keep children, bystanders and animals away from
the work area and at a safe distance from the
product.
• Make sure that only approved persons are in the
work area.
• Keep the work area clean and sufficiently
illuminated.
• Remove objects such as screws, bolts, wires and
stones from the work area before you use the
product.
• Make sure that there are no cables or hoses in the
operation direction of the product.
• Make sure that there is sufficient airflow in the work
area.

Electrical safety

WARNING:
shocks from electrical products. Do not use
the product in bad weather conditions. Do
not touch lightning conductors and metal
objects. Always use the product as given in
this operator's manual to prevent injury.
WARNING:
with RCD (residual-current device). An RCD
decreases the risk of electrical shock.
WARNING:
unprotected parts in the power unit. Always
disconnect the power plug before you open
the door to the electrical box.
CAUTION:
the product or generator must be sufficient
and constant to make sure that the motor
operates without problems. Incorrect voltage
causes the power consumption and the
temperature of the motor to increase until
the safety circuit releases. The dimension
of the power cord must agree with national
and local regulations. The dimension of the
mains socket must agree with the amperage
for the electrical socket and extension cable
of the product.
If the power mains has higher system
resistance, short voltage drop can occur
when the product is started. This can
influence the operation of other products, for
example flicker on the lights.
There is always a risk of
Always use a power supply
High voltage. There are
The power supply from
37