Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
5. Check the height of the laser dot again and push the slider (7) before the
laser (8) to switch to the horizontal line laser. Now a horizontal line in the
defined height is thrown over the walls.
For other applications there is also a vertical line laser. If both line lasers
are activated, a cross is projected.
Additionally, there is a 360° scale (11) on the rotating base. With this
scale, the laser can be adjusted to defined angles.
Maintenance and Cleaning
Do not immerse the spirit level in liquids of any kind.
Use only a moist cloth to clean all parts.
Do not subject the spirit level to mechanical stresses of any kind, this will
damage the precision.
Operating
7
Werbung
Inhaltsverzeichnis
