Switching Off; After Treatment - Philips PR3092 Bedienungsanleitung

ENGLISH
20
Do not intentionally touch the sensor in the centre of the BlueTouch
Note: You can also place the patch on your back and then press the mode
button to select the treatment mode. In that case, the Blue Touch Pain Relief
4
treatment time in the selected mode has elapsed. For the treatment
chapter.
Interrupting treatment
1
,
the treatment time is paused.
Note: After 10 minutes in power-save mode, the BlueTouch Pain Relief Patch
switches off.
2 To resume the treatment after a brief interruption, place the
,
treatment time continues to count down.

Switching off

1
time has elapsed, press the mode button one or more times until the
,
Note: The number of times you have to press the mode button until the
BlueTouch Pain Relief Patch switches off depends on the mode you selected.

After treatment

Treatment ends automatically after the treatment time in the selected
mode has elapsed, unless you remove the BlueTouch Pain Relief Patch and
press the mode button to stop treatment earlier.
Note: A sequence of two different tones indicates that the BlueTouch Pain
Relief Patch switches off and treatment has ended.
1
2
3