Mounting And Operation - Bosch AdvancedGrassCut 36V-33 Originalbetriebsanleitung

– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).

Mounting and Operation

Action
Product Features
Delivery scope
Mounting the protection guard
Troubleshooting
Brushcutter
Problem Possible Cause
Motor refuses to start Battery discharged
Battery too hot/cold
Battery not fully inserted
Grass wrapped around the spool
Garden tool functions On/Off switch defective
intermittently
Internal wiring of garden tool defective
Cutting head is blocked
Garden tool subject to Grass too high/dense
overload
Poor cutting perform- Garden tool subject to overload
ance
Excessive cutting line
Protection guard encrusted with mud
Bosch Power Tools
2
m/s
Action
Mounting the plant protector
Mounting the kickback protection/
operating advice for right-handers
Mounting the kickback protection/
operating advice for left-handers
Mounting the carrying strap
Battery charging and inserting
Switching on and off
Mounting the cutting line
Line feeding
Removing the spool
Mounting the blade
Working Advice 1
Working Advice 2
Working with the blade
Figure Page
Working with the spool
A 269
Storage
B 270
Maintenance
C 270
Accessories
EN 50636-2-91
= 1.5
Figure
Corrective Measure
Check the battery charge-control indicator and
charge the battery
Allow to cool/warm
Ensure battery is inserted correctly
Remove battery, then remove grass
Contact Bosch customer service agent
Contact Bosch customer service agent
Remove the cutting head, clear any blockages and
reinsert the cutting head
Cut in stages
Move the device more slowly
Rewind the line (see figure J) and check the cut-
ting blade
Clean inside of the protection guard
F 016 L94 068 | (14.01.2022)
English | 17
EN 62841-4-4
= 1.5
Page
D 271
E 272
F 272
G 273
H 273
I 274
J 275
K 276
L 276
M 277 − 278
N 279
O 279
P 280
Q 280
R 281
S − T 281 − 282
U 283