Connectivity Functions - Bosch GRG 18V-16 C Professional Originalbetriebsanleitung

20 | English
LED worklight
The LED worklight (13) improves visibility in the immediate
work area. It is automatically switched on when the on/off
switch (12) is pressed.
Suspension device
You can use the hanging ring (3) to attach the power tool to a
suspension device (e.g. on a production line).
– To do so, fold the hanging ring (3) upwards.
Regularly check the condition of the hanging ring and
u
the catch in the suspension device.
Belt clip
You can use the belt clip (7) to conveniently secure the
power tool to your belt.

Connectivity functions

System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific app before you
can use the connectivity functions.
– Download the app from the corresponding app store
(Apple App Store, Google Play Store).
Note: You will need to have a user account with the relev-
ant app store to do this.
App name iOS
Bosch Toolbox
Alerts
Problem Display
(see figure D)
Warning message
Problem Toolbox app dis-
play
Warning message
1 609 92A 6HC | (14.12.2021)
– Then select the MyTools or Connectivity sub-item in the
– The display of your mobile device shows you all of the
Data Transfer via Bluetooth
The built-in Bluetooth
regular intervals. Depending on ambient conditions, multiple
transmission intervals may be required before the power
tool is detected. If the power tool is not detected, check the
following:
– Is the distance to the mobile device too great?
– Is the coin cell for the built-in Bluetooth
– Switch Bluetooth
Android 5.1 (and newer)
Functions in Conjunction with the Power Tool
iOS 10 (and newer)
In conjunction with the Bluetooth
following connectivity functions are available for the power
tool:
– Registration and personalisation
– Status check, output of warning and error messages
– General information and settings (e.g. reminder interval
– Management
Android
Display Cause
colour
Yellow Jaws (23) dirty
Yellow Jaws (23) worn
Display Cause
colour
Yellow Jaws (23) dirty
Yellow
Jaws (23) worn
app.
subsequent steps required to connect the power tool to
the mobile device.
®
®
Low Energy Module sends a signal at
Reduce the distance between the mobile device and the
power tool.
ule weak or drained?
Contact an authorised after-sales service centre for
Bosch power tools to replace the coin cell.
®
off and on again on your mobile device.
Check whether the power tool has now been detected.
®
Low Energy module , the
for checking the jaws)
Corrective measure
– Clean the jaws (23)
– Check and, if required, replace the
jaws (23)
Corrective measure
– Clean the jaws (23)
– Check and, if required, replace the
jaws (23)
®
Low Energy Mod-
Bosch Power Tools