Cleaning, Maintenance And Ordering Spare Parts; Software-Update; Ordering Replacement Parts; Disposal And Recycling - EINHELL GE-AW 1144 SMART Originalbetriebsanleitung

8. Cleaning, maintenance and
ordering spare parts
The equipment is largely maintenance-free. How-
ever, we recommend regular checks and product
care in order to ensure a long service life.
Danger!
The equipment must be disconnected from the
power supply (pull the power plug) prior to perfor-
ming any maintenance.
Make sure that all the connected lines are de-
pressurized.
8.1 Maintenance
•
If the equipment becomes clogged, connect
the discharge line to the water line and dis-
connect the intake pipe. Open the water line.
Switch on the equipment several times for
approx. two seconds. This should resolve the
majority of clog-related problems.
•
To enable the pump to work correctly, check
the coarse filter (13) and the non-return valve
for dirt at regular intervals. Clean the coarse
filter under flowing water.
•
There are no other parts inside the equipment
which require maintenance.
8.2 Software update
If you want to update the software for your pump,
copy the new software to an empty USB stick
(format the USB stick fi rst if necessary). Have the
app notify you automatically about new software
updates or, if you prefer, consult our website for
information.
1. Prior to performing a software update you
must disconnect the equipment from the po-
wer supply by pulling the pump's power plug
out of the power socket.
2. Open the protective cap and connect the
USB stick to the USB connection (12) (Fig. 4).
3. Connect the pump's power cable.
4. Updating will start immediately and the LED
indicator (Fig. 5/Item B) will blink.
5. When the LED indicator (Fig. 5/Item B) is lit
steadily, the update has ended.
6. Pull out the USB stick and close the protecti-
ve cap.
Anl_GE_AW_1144_SMART_SPK13.indb 23 Anl_GE_AW_1144_SMART_SPK13.indb 23
GB
8.3 Cleaning the coarse fi lter insert
•
Clean the coarse filter insert at regular inter-
vals, and replace it if necessary.
•
Remove the coarse filter cap (3) and the
coarse filter (13) (Fig. 3).
•
Clean the coarse filter by tapping it on a flat
surface.
•
Wash the coarse filter under flowing, clear
water.
•
In cases of stubborn dirt, first wash with
soapy water, then rinse with clear water and
leave to dry in the air.
•
Do not use abrasive cleaning agents or petrol
to clean the coarse filter.
•
Assemble in reverse order.

8.4 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
- 23 -
10.01.2022 09:16:31 10.01.2022 09:16:31