28
www.aeg-automotive.com
Risk of injury!
Do not modify or manipulate the
•
product as this will increase the risk
of injury.
•
The high-pressure hose becomes
hot during use. Therefore allow it
to cool down before touching it and
rolling it up.
Do not use the compressor for more
•
than 6 minutes. Then allow it to cool
down for approx. 10 minutes. Over-
heating and permanent damage
may otherwise occur.
•
Please also note the operating inst-
ructions of connected devices.
Special notes
•
Do not inflate objects beyond the
intended or specified pressure. The
object could burst.
Never inflate larger objects such as
•
lorry or tractor tyres, air mattresses
or rubber boats. This exceeds the
delivery rate, thus the run-time of
the compressor.
The pressure specifications of the
•
manometer are reference values.
Check the pressure with a calibrated
air gauge.
•
The max. pressure of 150 PSI
(10.3 bar) will only be reached if the
pump volume is not greater than
0.5 L.