EINHELL BAS 12 Vario Bavaria Bedienungsanleitung Seite 9

Anleitung BAS 12 SPK1 19.06.2006
Fitting the keyless chuck (Fig. 2)
Unscrew the protective cap (a) from the bit
mount as shown in Figure 2.
Screw the keyless chuck (2) in reverse order
onto the thread of the bit mount (1) and secure
with the screw (b).
Forward/Reverse switch (5)
With the slide switch above the On/Off switch you
can select the direction of rotation of the battery-
powered drill/screwdriver and secure it against being
switched on accidentally. You can choose between
clockwise and anticlockwise rotation. To avoid
causing damage to the gearing it is advisable to
change the direction of rotation only when the tool is
at a standstill. The On/Off switch is blocked when
the slide switch is in centre position.
On/Off switch (6)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch, the
higher the speed of the battery-powered
drill/screwdriver.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.
Technical data
Voltage supply
Speed 0-500 rpm
Torque
Forward and reverse rotation
Chuck clamping width max. 10 mm
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level LPA: 60,7 dB(A)
Sound power level LWA: 71,7 dB(A)
–
Vibration
a
w
Weight
10:59 Uhr Seite 7
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
12 V d.c.
16 levels
yes
12 V d.c.
400 mA
< 2,5 m/s 2
1 kg
GB
7