Before First Use; Dust Container And Filter Assembly; Motor Filter; Switching On And Off - Westfalia LASER 2000 CT-680 Bedienungsanleitung

Before first Use

Remove the unit and the accessory out of the packaging. Keep packaging
materials out of reach of children. There is risk of suffocation!
Clean all parts of the unit before using for the first time, as described in the
chapter „Cleaning".

Dust Container and Filter Assembly

Please familiarize yourself with the proper usage of
the unit before using for the first time.
1. To disconnect the dust container from the motor
unit, press the unlock button (3). Tilt the dust
container down and remove it.
2. To open the dust container bottom, press the
unlock button (2) on the dust container. The
bottom of the dust container opens and dirt can
fall out. Use the dust container unlock button to
empty the dust container in between. So you do
not need to completely remove the dust container.
3. To remove the filter assembly (HEPA filter and
nylon filter); pull the filter assembly out of the dust
container. For cleaning the filters thoroughly, pull
the nylon filter out.

Motor Filter

Make sure the motor filter is always inserted when
switching the unit on.

Switching On and Off

1. Switch the vacuum cleaner only with the ON/OFF
switch (6) on and off and not by pulling the power
plug.
2. Make sure all filters are inserted correctly before switching on the cleaner.
All manuals and user guides at all-guides.com
Operation
9
9