Herunterladen Inhalt Inhalt Diese Seite drucken

Before First Use; Assembly And Operation; Using As Air Pump - Westfalia 41 76 67 Bedienungsanleitung

Autostaubsauger 12v/120w
Vorschau ausblenden Andere Handbücher für 41 76 67:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Before first Use

Take the appliance and all parts out of the packing. Keep packing away from
small children. There is danger of suffocation!

Assembly and Operation

1.
Check that the permanent filter (L) completely covers the motor opening (as
shown in the illustration on page III). Important! Never operate the appliance
without the filter.
2.
Place the appliance upper section on the dust collector (A).
3.
Fasten the 3 fastening clips (C) by hooking onto the dust collector at bottom
and pushing up.
4.
Insert the end of the suction hose (E) in the suction opening (B).
5.
Connect supplied accessories to vacuum cleaner according to intended
application. Fasten the required nozzle to the other end of the suction hose.
The floor nozzle (D) is very suitable for vacuuming dirt on vehicle floor and
seats and in the boot. Attach the brush to the floor nozzle to removed dried-
on dirt and fluff (hook on at top, press down and clip into place). The slot
nozzle (J) is particularly suitable for areas that are not easily accessible such
as corners, edges and narrow gaps.
6.
Insert the plug into the cigarette lighter socket of your vehicle or boat. Please
make sure that the supply voltage is 12 V
7.
Switch on the vacuum cleaner with the ON/OFF switch (H) and press the
switch in direction ON. Make sure the vacuum cleaner's air outlet (F) does
not get blocked while using the appliance.
8.
After use, switch the appliance off again using the ON/OFF switch. Then
remove the plug from the cigarette lighter socket. Never remove the plug by
pulling the cable. Store any accessories not being used in a safe place.

Using as Air Pump

You have the possibility of using the appliance as an air pump to blow up a wide
range of articles by simply changing the connection of the suction hose on the
appliance.
1.
Remove the suction hose (E) and connect it to the air outlet opening (F).
2.
Exchange the connected nozzle for the inflating nozzle (K).
All manuals and user guides at all-guides.com
Using
.
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis