Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Shoulder Strap
To use the vacuum cleaner with shoulder strap, hook the carabineer into the
provided holes (4). Adjust the length of the shoulder straps according to the
desired length. For adjusting, pull the clasp in the desired direction.
Suction Hose and Accessory
1.
The suction hose (12) fits only in one direction
into the suction opening (8). Insert the suction
hose up to the end into the suction opening.
2.
For the different varieties of use attach the turbo
brush either directly into the suction opening or
into the suction hose.
3.
Use the crevice tool (13) for crevices and corners
for sucking under and between cushions. Use the
upholstery brush (16) for curtains, draperies and
other fabrics, for furniture, lamps, ceiling fans and
fixtures. For removing the brush head out of the
upholstery brush, just slide the brush head to the
side and pull out.
Turbo Brush
1.
For cleaning the turbo brush thoroughly, it is
possible to detach the housing.
2.
Turn the turbo brush upside down and remove
the fastening bracket (15). Press the bracket
lightly to the side in order to easily remove the
bracket.
3.
If necessary, clean the turbo brush with a brush,
with tweezers or a similar object. Always remove
hair from the roll.
4.
For attaching the turbo brush, insert the pins into
the provided notches and fasten the lid with the
fastening bracket. Make sure the fastening
bracket is correctly attached.
All manuals and user guides at all-guides.com
Operation
10
Werbung
Inhaltsverzeichnis
