Uninstalling The Driver - Siemens CP 1623 Betriebsanleitung

All manuals and user guides at all-guides.com
Installing and uninstalling the driver
3.2

Uninstalling the driver

Uninstalling after using the CP 1623 with SIMATIC NET PC software
● The "SIMATIC NET, PC Software" CD is installed on the computer.
● Uninstall the SIMATIC NET PC software as described in the Installation Instructions of
the "SIMATIC NET, PC Software" CD.
NOTICE
The procedure recommended here deletes the entire SIMATIC NET PC software on the
computer not only the driver for the CP 1623.
Uninstalling after using the CP 1623 without SIMATIC NET PC software
If you remove the CP 1623 from your computer and want to uninstall the driver, follow the
steps below:
1. Open the Control Panel and go to the "Hardware" tab.
2. Click on the "Device Manager" button in the "Device Manager" group box.
3. Right-click on the driver of the "SIMATIC Miniport CP1623 PCIe Adapter"
communications processor in the path of the "SIMATIC NET" icon, select "Uninstall" and
confirm removal with "OK".
4. Restart your computer to completely remove the driver.
10
CP 1623
Operating Instructions (Compact), 02, A5E01175608