Representation Of Information; Safety Instructions - Bosch Rexroth 2GE Serie Montageanleitung

42/70 Bosch Rexroth AG
About this documentation
Tab.1: Required and supplementary documentation
Title
Safety Instructions for Rexroth
Tightening Systems
Rexroth Tightening Spindle
Documentation of the machine or
system manufacturer
Instructions for the other system
components
Generally applicable, legal and
other binding regulations of Euro-
pean and national legislation
Provisions for accident prevention
and environmental protection appli-
cable in your country
DIN 13 sheet 13
Additional information on the pro-
ject planning can be found in the
project planning manual of the
Rexroth Tightening System. Notes
on the commissioning can be found
in the online help for the operating
system.
2/3/4/5GE.... | 3 608 870 E96/2016-03
Document number
3 608 870 2DE
3 608 870 0...
1.3 Representation of infor-
mation
In order to enable you to work with your
product in a fast and safe way, uniform
safety instructions, symbols, terms and ab-
breviations are used. For a better under-
standing, they are explained in the following
sections.

1.3.1 Safety instructions

In this documentation, there are safety in-
structions before the sequence whenever
there is a risk of personal injury or damage
to equipment. The measures described to
avoid these hazards must be observed.
Document type
Safety regulation
Installation instructions