Westfalia A2S18 Originalanleitung Seite 19

 Before drilling, check that there is sufficient clearance for the
drill bit under the workpiece.
 Do not exert pressure on to the tool. To do so would shorten
its service life.
 Drill bits get hot during operation; allow cooling prior to
handling them.
 Never use your hands to remove sawdust, chips or waste
close by the bit.
 If you are interrupted when operating the cordless drill,
complete the process and switch off before looking up.
 Where possible, use clamps or a vice to hold your work.
 Examine the chuck regularly for signs of wear or damage.
Have damaged parts repaired by a qualified service centre.
 Always wait until the cordless drill has come to a complete
stop before putting it down.
 Periodically check all nuts, bolts and other fixings and tighten
where necessary.
 Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Safety Notes
Batteries do not belong in the household
garbage.
For battery disposal please check with your
local council.
15