Safety Notes - Westfalia 32 59 69 Bedienungsanleitung

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Make sure the voltage corresponds to the type label on the unit.
Wear personal protective equipment. Always wear safety goggles to
protect your eyes when using the grinding machine.
Do not use any damaged tools. Check the grinding wheel for spallings and
cracks before each use by performing visual and ringing tests.
Before using a new grinding wheel it is important to operate the machine for
at least 5 minutes with no load. Keep out of the danger zone while performing
this test.
Grinding wheel, flanges, discs and other accessories must precisely fit the
shaft of the grinder. Tools which do not precisely fit the shaft vibrate and may
cause loss of control.
The permitted speed of the tool must be at least equal to the maximum no
load speed of the power tool. Accessories which rotate faster than permitted
may be destroyed.
Diameter and thickness of the grinding wheel must conform to the require-
ments of your power tool. Wheels of the wrong size cannot be shielded or
controlled.
Use only grinding wheels which conform to the technical data printed in this
manual and on the wheels.
The grinding wheel will rotate for some time after the engine has been turned
off. Never try to stop the wheel by hand.
Wear suitable clothing when using the grinder. Tight clothing will not get
caught in moving parts easily.
Do not wear loose fitting jewellery, loose clothing, ties or long or open hair
when operating the machine. Avoid any loose objects on your person which
might be caught in rotating parts.
It is advisable to bolt the grinder to a work bench or stand before use.
Keep other people out of the immediate working area. All persons in the
working area must wear personal protective equipment. Fragments of the
work piece or the grinding disc may fly off and leave the immediate working
area and cause injuries or damage.

Safety Notes

10