Start-Up & Operation; Connection Of The Inverter - Westfalia 27 51 56 Bedienungsanleitung

With the power inverter you can use lot of 230 V devices out of your domicile.
The power inverter is perfect, e.g. for camping, for watching TV or for cooling
beverages. The power inverter puts out alternating current in a modified sine
wave.

Connection of the Inverter:

Connect the delivered line cords to the equivalent inverter's terminals
(black cord to minus terminal and red cord to plus terminal). Unscrew the
knurled screw and tuck the cord (red and black) to the stud bolt and re-
tighten the knurled screw (without using tools).
Connect the inverter's line cords with the supplying battery. Please pay
attention to connect the red cord to the plus terminal and the black cord to
the minus terminal. Now, switch on the inverter (green LED lights up) and
use the earthed socket (8 and 9) to connect the desired device.
IMPORTANT: Always switch on the inverter first before switching on the
connected device. When switching off, first switch off the device and then the
inverter.
If the inverter emits a beeping sound and the red LED lights up, it is a sign
for the battery being almost drained. The power inverter switches off, if the
voltage is below 10 V ± 0.5 V. It also switches off automatically if the con-
nected device's total wattage exceeds the inverter's output-capacity and if
the inverter's temperature exceeds 150°C due to prolonged use.
IMPORTANT: Always make sure the ventilator (4) is not covered during
operation to ensure sufficient cooling.
Start Up and Operation
8