Ironing Without Steam - Silvercrest SDBS 2400 B2 Bedienungsanleitung

Ironing without steam

NOTE
Always set the temperature control
the appliance on. The symbols on the temperature control
the following settings:
♦ Insert the plug into a mains power socket.
♦ Set the On/Off switch
integrated control lamp in the On/Off switch
lamp
♦ Turn the temperature control
♦ The heat-up indicator lamp
up indicator lamp
you can start ironing.
♦ Put the iron down on the stand
Set the temperature control
♦ Set the On/Off switch
integrated control lamp in the On/Off switch
go out.
♦ Pull the plug out of the mains socket.
│ GB │ IE
■ 34
Symbol
min –
(– max)
to the position "1" to switch the appliance on. The
light up, the "MAX" button
goes out, the set temperature has been reached and
to the position "0" to switch the appliance off. The
to the lowest level (min) before switching
Temperature
Material
Synthetics
Silk
Wool
Cotton/linen
and the heat-up indicator
flashes.
to set the required ironing temperature.
lights up during heating. As soon as the heat-
on the base station
to "min".
and the "MAX" button
correspond to
(approx.)
70–120°C
70–120°C
100–160°C
140–210°C
after ironing.
SDBS 2400 B2