Configuring Host Access To Volumes - Dell PowerVault MD3000i Bedienungsanleitung

6 Highlight Performance Options, then click Properties.
The Performance Options window is displayed.
7 In the Performance Options window, highlight Flow Control,
and set its value to Rx & Tx Enabled.
8 Repeat step 2 to step 7 for all other network interfaces used
for iSCSI traffic.

Configuring Host Access to Volumes

Installing and Configuring Dell EqualLogic Host Integration Tool (HIT) Kit
1 Download the latest HIT tool kit on your database server.
2 Double click Setup64.exe to launch the installation window.
3 In the Welcome to the Host Integration Tools, update program window,
click Next.
4 In the License Agreements window, select I accept the terms of all
the license agreements, and click Next.
5 On the Installation Type window, click Next.
6 On the Ready to install the components window, click Install.
The Installation Status window and the Software Update Installation
Wizard window is displayed.
7 On the Installation Complete window, click Finish.
8 On the System Restart Required window, select Yes, I want to restart
my computer now, and click OK.
9 Once the server is back up, a Remote Setup Wizard window is displayed.
10 Select Configure MPIO settings for this computer, then click Next.
11 Move the iSCSI network subnets under Subnets included for MPIO.
Move all other network subnets under Subnets excluded from MPIO.
Check the box beside Load balance across paths. Click Finish.
12 Repeat step 1 to step 11 on all other hosts in the cluster.
Configuring Network and Storage for Oracle RAC Database
39