Bosch CR 10 H Bedienungsanleitung Seite 25

Systems with several heating circuits (remote control – Fb)
▶ A.1 = Set and confirm Fb (remote control)
▶ Select and confirm heating circuit (HC = 1...8).
Ventilation unit (OFF)
▶ Switch on the system / Reset CR 10 H.
Three dashes are displayed while the connection is being
established.
Only ventilation unit:
▶ A.1 = Set and confirm OFF
▶ U.1 = (1 ...4) Select and confirm ventilation zone.
4.4 Settings in the service menu
Setting Adjustment
range
A.1 CO | Fb | OFF
H.C HC1 ... HC8
U.1 OFF | 1 | 2 | 3 | 4
d.1 2 | 3 | 4
E.1 – 3.0 ... 0.0 ... 3.0 Correction value for the room temperature
P.1 4 | 5
CR 10 H – 6720876740 (2017/08)
Description
1)
Controller (CO), remote control (Fb), only the
ventilation unit (OFF)
Heating circuit 1 to 8
Ventilation zone
Control characteristics (reaction speed)
2: 2K P-range = Fast reaction
3: 3K P-range = Medium reaction
4: 4K P-range= Slow reaction
displayed
Flow temperature control (4) or output
control (5)
Information for heating contractor
2)
°C
°F
°C
°C
°F
°F
°C
°F
°C
°F
°C
°F
25