Westfalia WT 483 Bedienungsanleitung Seite 10

SET ALARM 1 AND ALARM 2
1. Press and hold
knob to set the desired hour. PM will appear on the display to indicate afternoon time if 12-Hr
format is selected. There is no AM indicator.
2. Press VOL/TUNING knob once again, the minute digits flash. Rotate the knob to set desired
minutes.
Press VOL/TUNING knob once again, LCD displays "bu" (buzzer), rotate the knob to select
3.
the wake-up sound sources :-
bu = Buzzer
rd = Radio
Press VOL/TUNING once again, "1-7" flash, rotate the knob to select:-
4.
1-7 = Monday to Sunday (daily alarm)
1-5 = Monday to Friday (weekdays alarm)
6-7 = Saturday and Sunday (weekends alarm)
1-1 = Single day alarm only (alarm works for one day only)
If "rd" (wake-to-radio) is selected, press VOL/TUNING knob once again, "HI" or "LO" is
5.
displayed. Rotate VOL/TUNING knob to select the volume of radio you wake up to. This
selection does not apply for "bu" (wake-to-buzzer).
Press VOL/TUNING knob once again to confirm alarm 1's setting. In the middle of your alarm
6.
setting, press SET once to store and exit the alarm set mode.
7. To set Alarm 2, press and hold
TURN ON OR OFF ALARM 1 AND 2 (default alarm time at 6:00 AM)
1. At normal time display, press
again to deactivate Alarm 1,
2. Press button once to activate Alarm 2,
Alarm 2,
STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related alarm icon flashes. Press
sounding or press
After that both
button,
button once to activate Alarm 1,
icon disappears.
once to stop alarm 2 sounding. This will reset it to come on the following day.
icon and/or icon remains on the display.
icon and alarm 1's hour digit flash, rotate the VOL/TUNING
button and repeat step 1-6 above.
icon disappears.
icon appears. Press once again to deactivate
EN3
icon appears. Press
button to stop alarm 1