Remote Controlling The Camera From An External Pulse Signal - Sony 3CCD Bedienungsanleitung

Connection to Enable Remote Control

Remote Controlling the Camera from an External Pulse Signal

The image can be captured to the built-in frame memory as
a still image using a pulse signal input to the EXT CTRL
connector from a remote sensor and switch.
Camera cable: CCXC-9DB (D-sub 9-pin)˜BNC
connectors), or CCMC-9DS (D-sub 9-pin)˜BNC, S-video
connectors)
DXC-9100P
FREEZE
MENU FUNCTION DATA
LENS
UP
WHITE
SOURCE BARS
DOWN
CCU
SCAN
RGB/SYNC
REMOTE
VIDEO OUT
DC IN/
EXT CTRL
VBS
DC IN/VBS
CCDC-5/10/25/50A/100A cable or
CCMC-12P02/05/20/25 cable
If a CCMC cable is used, the S-video signal is also output from the
S-video output of the CMA-D2CE/D2MDCE
For information on a), b), C), see "Connecting to Video Equipment
With RGB or S-Video Inputs" on page 44.
50
RGB/SYNC



or


Camera cable CCXC-9DD (D-sub 9-pin˜D-sub 9-pin)
Sensor, switch, etc.
For details of the timing of the pulse input to the EXT CTRL
connector, see "Capturing the Image into Memory by Using the
Freeze Function" on page 33.
R input
G input
B input
Sync input
Composite video (BNC) or
S-video input (4-pin)
1
Set the MODE selector
to the "1" position.
2
CMA-D2CE/D2MDCE
camera adaptor
RGB monitor, multi-
scan monitor, multi-
scan printer c) , image
processor, etc.
a)
b)
RGB/SYNC
Computer, image
processor, etc.
AC IN
Power cord
CAMERA (4-pin or 12-pin)