Sony 3CCD Bedienungsanleitung Seite 21

LEVEL
This item appears when "DETAIL" is set to "ON".
Adjusts the sharpness of the subject outlines within the
range from -99 to +99, when DETAIL is set to ON.
Adjusting direction Outline of the image
+
Sharper with more detail on the image
outline.
−
Softener with less detail.
By pressing the DATA UP and DATA DOWN buttons
together, the values are reset to ±00
PAGE 3 menu
This section describes in detail items on PAGE 3 menu.
> PAGE 3 scan
H. PHASE
SC PHASE R
F i ne
G SYNC
D–SUB V i deo
D–SUB S ync
EXT. CTRL (BNC)
FREEZE
: NOR : A
± 00
ough 0
± 00
ON
Y / C
C. SYNC
TR G. N I I
I NT. CTRL
The following tables shows the PAGE 3 menu items, their
contents and reference pages.
Item Content of settings
Adjusts the difference in phase
H.PHASE
between the subcarrier and
SC PHASE
horizontal synchronization during
external synchronization.
G SYNC Adds a sync signal to the G (green)
channel of the RGB output.
D-SUB Video Outputs the video signal from the
RGB/SYNC (D-sub)
connector.
D-SUB Sync Outputs sync signal from the
RGB/SYNC (D-sub)
connector.
EXT.CTRL (BNC) Selects the EXT CTRL signal input
(sync signal/external pulse signal)
FREEZE Selects how to capture the image
into memory (external pulse signal/
FREEZE button on the rear
panel).
Selects the memory mode (F/F or
MODE a)
F/S)
a) This item appears when "FREEZE" is set to "EXT.CTRL".
Ref. page
22
22
22
23
23
23
23
21