Conrad 98 61 90 Bedienungsanleitung Seite 82

Windows® Live Messenger
1. Follow the instructions in the sub-chapter "Web UI -
Configuration" > "MSN".
2. Start a Windows Live Messenger from the remote site and
login with an account listed on "Contact Account" of "Web
UI - Configuration" > "MSN".
3. Authorize the main unit (whose name depends on the
information you have filled in).
4. You are now able to get the status and control the main unit
with the Windows® Live Messenger.
5. The main unit will send you a message if the power socket(s)
is / are reset.
6. You can control / get the status using the following
commands:
Command Parameters
SET
To set the action of the power socket(s). The first parameter
denotes the actions: ON (on), OFF (off) or RESET (reset)
while the second parameter denotes which power socket(s):
0 = both, 1 = power socket 1, 2 = power socket 2.
e.g. "SET RESET 0" is the command to reset both power
sockets.
82
[ON / OFF / RESET] [0 / 1 / 2]