Conrad 98 61 90 Bedienungsanleitung Seite 66

Delay before
checking Website
/ IP Address after
power reset
Outlet power reset
delay
Power-on delay
between Outlet 1
and Outlet 2
66
The valid range is 0 – 30 minutes.
If the setting is 0 (default setting), the
main unit will reset the corresponding
power socket when the target server(s)
are not responding. It will not reset
the power socket(s) again before the
connection is resumed.
If the setting is 1 – 30 minutes, the
main unit will reset the corresponding
power socket when the target
server(s) are not responding. It will
wait according to your setting, and
check again. If the connection is still
not resumed, the power socket(s) will
be reset once more. They will not be
reset again if the connection is still not
resumed.
The length of time the power sockets
will stay off in the resetting process.
If both of the power sockets are put in
the same website group, the second
power socket will be reset with the
delay time set here.