Conrad 98 61 90 Bedienungsanleitung Seite 64

There are two groups of websites. The first group
consists of the first four rows, while the second group
consists of the last row.
The first group will be considered as timeout only if all
the target servers are not responding.
A power socket can only be assigned to one group.
i.e.
• If you assign "All" to the first group, you cannot
assign any power socket to the second group;
• If you assign the first power socket to the first group,
you cannot assign it to the second group.
Time-out Setting
Set time-out for each
Website / IP Address
64
If the target server does not
respond within the time limit,
the main unit will consider the
connection to that server as
having failed (timeout). The
default setting is 3 seconds.