2.
Intended use
The product is intended to monitor the network status of network
devices and control the power cycle of the two power sockets.
The power cycle will restart automatically when the Internet
connectivity is lost or when the monitored network device
does not respond. The power cycle can also be controlled by
a preset schedule or remotely via an instant messaging tool
like MSN/the web user interface. The USB port can be use to
operate / charge a USB device. The product is powered by
125 – 250 V/AC, 50/60 Hz. Use only in a dry indoor
environment.
For safety and approval purposes (CE), you must not rebuild
and/or modify this product. If you use the product for purposes
other than those described above, the product may be
damaged. In addition, improper use can cause hazards such
as short circuiting, fire, electric shock etc. Read the instructions
carefully and keep them. Make this product available to third
parties only together with its operating instructions.
3.
Delivery content
•
Main unit
•
Power cable
•
LAN cable
•
Quick installation guide
•
Spare fuse
•
Operating instructions
48