Siemens Sitrans LR460 Kurzanleitung Seite 16

5. The equipment has not been assessed as a safety related device (as referred to by
Directive 94/9/EC Annex II, clause 1.5).
6. Installation and inspection of this equipment shall be carried out by suitably trained
personnel in accordance with the applicable code of practice (EN 61241-14 and EN 61241
–17 in Europe).
7. Repair of this equipment shall be carried out by suitably trained personnel in accordance
with the applicable code of practice.
8. Components to be incorporated into or used as replacements in the equipment shall be
fitted by suitably trained personnel in accordance with the manufacturer's
documentation.
9. It is the user's responsibility to ensure that a manual override is possible in order to shut
down the equipment, and that protective systems are incorporated within automatic
processes which deviate from the intended operating conditions, provided that this does
not compromise safety.
10. Equipment Marking: The equipment marking contains at least the information on the
product label. See inside front cover for product nameplate illustrations.
11. If the equipment is likely to come into contact with aggressive substances, it is the user's
responsibility to take suitable precautions to prevent it from being adversely affected, and
to ensure that the type of protection is not compromised.
• Aggressive substances include, for example, acidic liquids or gases that may attack
metals, or solvents that may affect polymeric materials.
• Suitable precautions include, for example, regular checks as part of routine
inspections, or establishing from the material's data sheet that it is resistant to
specific chemicals.
SPECIAL CONDITIONS FOR SAFE USE
The 'X' suffix to the certificate number relates to the following special condition(s) for
safe use.
• Cable or conduit entries must meet the requirements of European Directive 94/9/EC
for Group II, Category 1D, 1/2D, or 2D, as appropriate, and must maintain the overall
IP rating of the enclosure.
• For applications that require the purge feature, the user shall implement a means to
ensure that combustible dust from the hazardous area cannot enter the purge
supply in such a way as to compromise the area classification.
Page EN-14 SITRANS LR 460 – QUICK START MANUAL 7ML19985QW81