Setting Alarm Time - Grundig Sonoclock 795 DCF Bedienungsanleitung

SETTINGS
Note:
If a back-up battery has not been
7
inserted, the time is automatically
reset by DCF time synchronisa-
tion as long as the DCF recep-
tion is strong enough. Alarm time
and time zone synchronisation
are each reset to the values
» « and »
00:00
that, in this case, you may be
wakened at the wrong time.

Setting alarm time 1

1
Press »SET« twice.
– Display: the last alarm time set,
»AL 1
ternately.
2
Press »HOUR/VOL+« briefly to
set the hours step-by-step or hold
down to run through the hours
continuously.
3
Press »MIN/VOL-« briefly to set
the minutes step-by-step or hold
down to run through the minutes
continuously.
– The device saves the set alarm
time automatically after 10 se-
conds.
»AL 1
– Display:
this means the alarm is activa-
ted.
– The device wakes you up at the
set time with the alarm signal of
your choice.
22 ENGLISH
________________________________________
«. Please note
00
:
« and » « flash al-
« lights up,
Setting alarm time 2
1
Press »SET« three times.
– Display: the last alarm time set,
»AL 2
nately.
2
Press »HOUR/VOL+« briefly to
set the hours step-by-step or hold
down to run through the hours
continuously.
3
Press »MIN/VOL-« briefly to set
the minutes step-by-step or hold
down to run through the minutes
continuously.
– The device saves the set alarm
time automatically after 10 se-
conds.
»AL 2
– Display:
this means the alarm is activa-
ted.
– The device wakes you up at the
set time with the alarm signal of
your choice.
« and » « flash alter-
:
« lights up,