The Configuration Program - Introduction And Operation - Hama 00062765 Bedienungsanleitung

6. Enter the code required for the target network in the subsequent window. Switch to the Advanced tab.
7. If you want to connect to an access point or router, we recommend that you leave all settings on this
page as they are. If you want to connect to another wireless LAN client device, e.g. a USB stick or card
bus, select Ad-hoc as the Network type and the same channel used by the client device under Channel.
8. Click Ok to confirm your entries. Switch to the Current status tab. All current information on your profile
is displayed here. A green bar for the Signal strength shows that you are connected to the target
network.
If no connection is displayed, or if you want comprehensive instructions, please read on under "The configu-
ration program – introduction and operation".
3. The configuration program – introduction and operation
Open the wireless LAN configuration utility by clicking the WLAN 802.11g client assistant link on the Desktop
or under Start/Programs/WLAN 802.11g USB Adapter/WLAN 802.11g client assistant.
All profiles saved are shown in the window at the top left. Initially, only the standard profile is saved here.
Details on the selected profile are displayed in this list. The right part of the window there are various buttons
for editing profiles.
The Sort profiles button allows you to add created profiles to a list of Automatically saved profiles.
18
This view gives you information on various settings of your
wireless LAN. If the target network to be connected is not
encrypted, the WLAN device may already have automati-
cally connected to an available network. If this is the case,
the signal strength display at the bottom of the screen
shows a signal.
Change to the Profile management tab.
When configuring your USB stick, it is useful to create
a profile. A profile serves to save various settings for a
connection under a certain name. For example, if you want
to connect to various wireless networks, you can save the
settings for the networks in profiles, which allows you to
change the configuration quickly.