Inhaltsverzeichnis
Werbung
Hints
Do not press the locking button while the mini milling and polishing machine is
running!
Check from time to time the tightness of your collet nut especially during
prolonged use of the same accessory.
The correct way to hold the mini milling and polishing machine is to grip it with
thumb and index finger, just like holding a pen.
Use clamps or a vice to fix the work piece, so you can use both hands for
work.
After prolonged use the mini milling and polishing machine becomes hot.
Switch the unit off and let it cool down.
Do not force the accessory to avoid damaging the spindle.
Maintenance and Cleaning
To clean the ventilation slots use a brush.
Clean the mini milling and polishing machine with a dry or soft moistened
cloth.
Never immerse the unit in water.
Do not use aggressive chemicals or abrasives to clean the housing.
Hints, Maintenance and Cleaning
3
Werbung
Inhaltsverzeichnis
