Inhaltsverzeichnis
Werbung
For safe use, read the included General Safety Notes before using
the unit.
With the mini milling and polishing machine you can make close up and precision
work on small work pieces and in confined spaces. It is the ideal tool for hobby,
model making and repairing electronics and small Do-it-yourself tasks.
With the mini drill and milling machine you can sand, polish, engrave, grind, cut
and clean your work piece.
The rotation speed is adjustable between 3.000 revolutions/min and 13.000
revolutions/min.
Start up
1. Ensure that the On/Off switch (1) is in position OFF.
2. Press the locking button (2) down and turn counter clockwise to open the
collet nut (3).
3. Open the collet to fit in the accessory.
4. Push the selected accessory deep enough into the chuck of the collet.
5. Tighten the collet nut with your hand. Do not use pliers.
6. Release the locking button.
7. Connect the adaptor to the power socket.
8. Turn the ON/OFF switch in position ON and the mini milling and polishing
machine goes on. Adjust the rotation speed by turning the switch to the
position ON.
3
2
Start Up
1
2
Werbung
Inhaltsverzeichnis
