Intended Use; Start-Up - Westfalia 49 43 85 Bedienungsanleitung

Intended Use

 The wall router cuts slots for cables and pipes in all kinds of brickwork and
concrete, provided that suitable cutting discs, as described in this manual, are
used.
 The machine is suitable for dry cutting only.
 This machine has been developed for private use and is not designed for the
demands of industrial use.

Start-Up

 Make sure that the mains voltage corresponds to the rated voltage of this
machine. Units rated with 230 V also can be used with 220 V power networks
and vice versa.
 Before connecting the machine to mains power, make sure that it is switch off
to prevent unintentional starting.
 First push the switch release button towards you (step 1). Then additionally
press the On/Off switch (2) to switch on the machine (step 2). A control
electronics unit slowly starts the machine (soft start). The machine must have
reached full speed before you begin to slit.
Start-Up
1
11
2