Safety Notes - Westfalia 49 43 85 Bedienungsanleitung

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
 This manual belongs to the product. It contains important notes on operating
the unit. Please pass it on along with the unit if it is handed over to a third
party!
 Dispose of the packaging materials carefully; the plastic bags may become a
deadly toy for children.
 Please make sure the mains voltage available in your area corresponds to
the operating voltage stated on the type label.
 Do not continue to use the unit if the unit or the line cord are damaged.
Repair work must be done by a qualified service technician.
 Do not conduct the line cord over sharp edges and corners or hot
surfaces.
 Switch the unit off and unplug it if you don't use it or clean it.
 For your safety, please wear Safety Goggles, a dust mask and ear
protection.
 Only use diamond cutting discs that are sharp and in good
condition. Replace cutting discs instantly if they have cracks or when they
are deformed. Always replace both discs at the same time.
 Only use cutting discs whose permitted speed is at least as high as the
highest no-load speed of the machine (13000 rpm or 80 m/s).
 When replacing the cutting discs, ensure the right dimensions of the discs.
The mounting hole diameter must fit the mounting flange without tolerance.
Do not use any adapters.
 Do not disassemble the unit or attempt to repair it yourself. It does not
contain parts serviceable by you. In the case of questions or problems, turn
to our customer support.

Safety Notes

3