Everyday Use - Silvercrest SSR 1080 B2 Bedienungsanleitung Und Serviceinformationen

Satellite Receiver SSR 1080 B2

Everyday Use

Powering the Device Up/Down
Power the satellite receiver up by pressing the On/Standby button (1) on the device or the On/Standby button (43) on the remote control. Pressing
the On/Standby button (1/43) again will power the device back down. The device then switches to standby mode. If you cannot switch the device
on by using the On/Standby button (1/43), check the main power switch POWER (16) on the back panel and switch it to the POWER position.
Selecting Channels
Using the Channel Up/Down Buttons
Press the navigation buttons /P+ or /P- (26) on the remote control to move to the next or previous channel.
Using the Numeric Buttons
Enter the channel number you want using the numeric buttons (20).
Using the Channel List
Press the OK/ENTER button (25) to open the Programme List. You can highlight the channel you want using the /P+ or /P- navigation buttons
(26). Press the OK/ENTER button (25) to switch to the channel selected. Press the PREV (29) and NEXT (28) buttons to scroll through the list faster.
Groups are a really easy way of accessing a specific channel. When you open the TV or Radio Channel List, you can use the [Red] button (39) to
select different groups. Groups allow you to filter the channel list by the following criteria: "Satellite", "Favourite", "Provider" and "Scramble". If
you select the "All TV" or "All Radio" group, all saved channels will be displayed again (no filter is applied). The group currently selected is shown
in the first line of the channel list. Press the [Green] button (38) to sort the selected channel list as follows: "Numeric", "Alphabet" and "FTA to
CAS" (unscrambled first, then scrambled). Press the FAV button (37) to open the list of your favourite channels. Press the /VOL- or /VOL+ (26)
navigation buttons to move between the different lists. To locate a specific channel quickly, you can press the FIND button (30) to open a search
box. Press the navigation buttons (26) on the remote control to select the letters of the channel you are looking for and then press OK/ENTER (25)
to apply the selected character. The left window will only show the channels matching the character sequence entered. You can use the [Red]
button (39) to delete the entire entry or the [Green] (38) button to delete one character. When you see the channel you want press the [Yellow]
button (23) to move to the left window where you can select the channel.
Adjusting the Volume
Press the /VOL- or /VOL+ navigation buttons (26) to adjust the volume of your digital receiver. Press the MUTE button (17) to mute or to restore
the sound output.
Helpful Special Functions
Press the TEXT button (22) to launch the Teletext view. Press the EPG button (27) to open the Electronic Programme Guide. If subtitles are available,
press the SUB button (38) to show the subtitles. Press the TV/RADIO button (19) to switch between TV and radio channels.
Info Button
The INFO button (36) lets you display information about the current programme. Press this button once to show information about the current and
next programmes. Press this button twice to display advanced information about the current programme. Press the /VOL- or /VOL+ navigation
buttons (26) to switch between the advanced information for the current programme and the next one. Press the INFO button (36) again to close the
information window.
30 - English