Intended Use; Before First Use; Inserting The Tool - Westfalia 80 44 11 Bedienungsanleitung

Intended Use

The electric mixer has been designed for private use only. It has not been
designed for operation in industry. With the supplied mixing paddle the electric
mixer is suitable for mixing low-viscosity emulsions and viscous materials, for
example: paints, lacquer, adhesives, mortar, etc.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Unpack the electric mixer and check all parts for any damage in transit. Dispose
of packaging materials or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children.

Inserting the Tool

Always disconnect the mains plug form the socket before inserting or exchanging
the tool. The mixer is equipped with a M 14 collet.
1. Screw the mixer with mixing paddle (7) onto the tool carrier (6).
2. Fix it by using the 2 supplied open-end wrenches (22 mm). Drag the
wrenches to each other so that the mixer is firmly fixed in the tool carrier.
To remove the agitator, put the wrench back in and pull them away from each
other.
Operation
10