Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Turning ON/OFF and adjusting the Speed
To turn ON the screwdriver, press
the ON/OFF switch (7) and keep the
switch pressed. The deeper the
switch is pressed, the faster the
screwdriver will run. To turn off the
screwdriver, release the ON/OFF
switch.
If desired, the ON/OFF switch can
be locked in position by pressing the
locking knob (8). To turn off the
screwdriver,
press
switch briefly and than release it. The locking knob will disengage and will
release the ON/OFF switch.
The speed can be adjusted with the speed control (6). The speed can adjusted
infinitely in the range from 0 – 2500 rpm in order to adapt it for processing
various materials and applications.
Adjusting the Rotating Direction
The rotating direction can be reversed only while the motor is at a complete
standstill. Turn the rotating direction lever (5) in the desired position
Lever to the Left
Lever to the Right
Operation
the
ON/OFF
for Left Hand Rotation (Loosening Screws)
for Right Hand Rotation (Tightening Screws)
10
Werbung
Inhaltsverzeichnis
