Product Information - Siemens SIMATIC IPC677D Handbuch

SIMATIC
Industrial PCs
SIMATIC IPC677D "Suitable for Linux"

Product Information

Manufacturer's Declaration "Suitable for Linux" SIMATIC IPC677D
This Manufacturer's Declaration applies to the installation and use of Novell openSUSE Linux distribution 13.1 on Siemens
SIMATIC IPC677D.
We hereby declare that our product, the Siemens SIMATIC IPC677D described in this document, was successfully tested in
terms of installation and use of the specially selected version of Linux Novell openSUSE Linux distribution 13.1 (kernel
version 3.11.6.4-desktop x86_64) according to a fixed test strategy that is set out in this document. This does not make any
claims regarding the suitability of other software versions, updates, upgrades or releases of Novell SUSE Linux. The tested
software is not a Siemens product, nor is it distributed, recommended or supported by Siemens. Consquently, Siemens
accepts no responsibility for the use of any versions or distributions of Linux on Siemens SIMATIC IPC677D.
Consequently, this Manufacturer's Declaration includes no warranty, assurance of properties, or guarantee, especially within
the meaning of a guarantee as per Section 443 of the German Civil Code ("Guarantee of Quality" according to Section 443
BGB). This declaration does not constitute any rights that might result from any Linux hardware certification programs of
Novell or any third persons (e.g. support).
Siemens Aktiengesellschaft, 23/04/2014
Note
The tested version of Novell openSUSE Linux distribution does not include additional software updates, versions,
•
upgrades or releases.
Please read the information in the corresponding operating instructions for Siemens SIMATIC IPC677D.
•
Consequently, Siemens accepts no responsibility for the transfer of Linux on Siemens SIMATIC IPC677D.
•
Description
This Manufacturer's Declaration "Suitable for Linux" describes the testing of SIMATIC PC with a specially selected version of
Linux.
Industrial PC Siemens SIMATIC IPC677D with:
● Intel Xeon CPU with integrated graphics
® ®
● Chipset Intel 8Series/C220 Series
● 22" touch display
● Operating system selected for test purposes:
Novell openSUSE Linux 13.1 (3.11.6.4-desktop x86_64)
Tested configuration
SIMATIC PC
BIOS
CPU
RAM
Mass-storage controller
SATA hard disk
DVD/CD-ROM
Network adapter
© Siemens AG 2014. All rights reserved
A5E34147575-AA, 05/2014
Siemens SIMATIC IPC677D, 6AV7260-2GH30-3XX0
INSYDE V19.02.01, A5E31635317-ES001
Intel Xeon CPU E3-1268L v3 @ 2.30GHz
® ®
8 GB DDR3L-1600-ECC SDRAM
Intel 8 Series/C220 Chipset SATA Controller [AHCI mode]
2 × 2.5" 250 GB TOSHIBA MK2576GSX
SATA MATSHITA Slim Line DVD-RAM UJ8E0
Intel I217-LM Gigabit Network (enp0s25)
Intel I210 Gigabit Network (enp3s0)
1