Faller 161349 Bedienungsanleitung Seite 37

Flashing LED Fault message
»Car 2« + Fault during char-
»laden« ging
»Car 2« + Voltage of rechar-
»laden« + geable battery
»voll« is wrong
»Car 2« + Parameters could
»Car 1« not be transmitted
»Car 2« + Vehicle's voltage
»Car 1« + details do not cor-
»laden« respond with the
measured voltage
»Car 2« + The wrong vehicle
»Car 1« + has been connec-
»voll« ted:
An analog vehicle
has been connec-
ted, but key »Car
2« was pressed
»Car 2« + Temperature in
»Car 1« + vehicle is too high
»laden« + at the start of the
»voll« charging procedure
Tab. 5: How to deal with problems – with a digital vehicle
How to deal with problems
Remedy
Start the charging proce-
X
dure again.
If the fault message still
X
appears: Consult FALLER's
customer service depart-
ment.
This is no original rechargeable
battery or it is faulty.
Consult FALLER's customer
X
service department.
Check whether you have
X
connected and switched on
a digital vehicle.
Charging unit is faulty.
Consult FALLER's customer
X
service department.
Send vehicle for examina-
X
tion to FALLER's customer
service department.
Press the key »Car 1«.
X
Operate vehicle and char-
X
ging unit at a cooler place.
EN
37