Faller 161349 Bedienungsanleitung Seite 32

Charging vehicles
Switch the vehicle on.
X
Charging unit and vehicle communicate with each other to allow the
charging unit to identify which size of rechargeable battery has been
built into the vehicle.
If special functions are switched on: switch the special functions off by
X
pressing the functional keys that are lit.
Press the key »Car 2«.
X
The charging procedure will begin. Both LEDs »Car 2« and »laden«
light up.
LED »Car 2« flashes once every minute to check the state of the rechar-
geable battery.
When LED »voll« lights up, the rechargeable battery is fully charged.
LED of the F0-F4 keys show the status of the charging procedure:
LED/Keys
EN
»F0«
»F1«
»F2«
»F3«
»F4«
Tab. 3: Status of charging procedure
If you want to switch some special functions on: press the suitable func-
X
tional keys, see Chapter 6 „Switching special functions on and off",
page 33.
Switch the vehicle off.
X
Disconnect the charging cable from the vehicle and from the char-
X
ging unit.
32
Status of charging procedure
Check if battery is wrong or if battery's polarity is
reversed
Start charging procedure
Check battery's voltage
Read charging CV from vehicle (only digital vehicles)
Charge rechargeable battery