Silvercrest SWDR 500 A1 - IAN 282353 Bedienungsanleitung Seite 25

The time can only be set while the device is powered off. If it is powered on,
press the POWER/SLEEP button (8) to power the device off.
If no button is pressed for approx. 7 seconds while changing the setting, the
settings are applied and the unit exits the setting mode.
buttons "VOL-" (12) or "VOL+" (4) pressed to accelerate the digits count.
 While powered off, press and hold the "SET/STORE" button (9) until the
display (6) reads "US" or "EU". Now press the "VOL-" (12) or "VOL+" (4)
button to select your preferred date format.
Example:
EU DD.MM.YYYY
US MM.DD.YYYY
Press the "SET/STORE" button (9) to confirm your selection.
Please remember that the tuning spacing for the AM band is also changed
with this setting.
 Now set the correct time zone as described in the previous chapter and
press the "SET/STORE" button (9) to confirm the setting. The set time format
flashes.
 Now you can press the "VOL-" (12) or "VOL+" (4) buttons to set the desired
time format. Upon factory delivery the time format is set to 24 hours. You
have the choice between 12H and 24H. Press the "SET/STORE" button (9)
to confirm the setting. The hour digit flashes.
 Press the "VOL-" (12) and "VOL +" (4) buttons to set the hour. Press the
"SET/STORE" button (9) to confirm the setting. The minutes digit flashes.
 Press the "VOL-" (12) and "VOL +" (4) buttons to set the minute. Press the
"SET/STORE" button (9) to confirm the setting. The year digit flashes.
 Press the "VOL-" (12) or "VOL+" (4) buttons to set the correct year. Press the
"SET/STORE" button (9) to confirm the setting. The month digit flashes.
SilverCrest SWDR 500 A1
You can keep the
English - 23